Operation
Drive Controls, Switches and Instruments
48 48
9811-3400-4
Instrument Panel
Introduction
P4-2019
794940-1
Fig 32.
The instruments and indicator lights are grouped together
on an instrument panel. K
Fig 32. ( T 48).
As well as indicator lights for the direction indicators, main
beam etc. there are warning lights for various fault
conditions. When a warning light comes on an alarm will
sound. The only way to cancel the alarm is to set the
starter to 'off'.
Do not use the machine if it has a fault condition, or you
may damage the engine and/or the transmission.
All instruments and indicators will be turned off when the
starter switch is set to off. (But the hazard warning indicator
will still operate if the hazard warning lights are switched
on.)
A Digital Display
B Instruments
C Warning and Indicator Lights
To Next Page
Loading...
