Operation
Drive Controls, Switches and Instruments
47 47
9811-3400-4
Starter Switch
T2-050
This is a rotary switch, operated by the starter key. It has
four positions. The key can be removed only with the
switch set to O.
Note: Do not operate the starter motor for more than 20
seconds at one time. Let the starter motor cool for at least
two minutes between starts.
A243230-1
Fig 30.
Cab Interior Light
T2-020
Press either end of the light unit A to switch on the cab
interior light. Pressing the other end will switch the light off.
Make sure the light is turned off when you intend to leave
the machine for a long period of time.
C007130-1
Fig 31.
O Return the key to this position to stop the engine.
Make sure the transmission is in neutral, the
attachments have been lowered and the park brake
is engaged before stopping the engine.
IGN Putting the switch to this position connects the
battery to all the electrical circuits except the lights
and hazard warning circuit. (The lights and hazard
warning circuits are permanently live.) The starter
key will spring back to this position when it is
released from positions H or HS.
H Heat Position. Holding the key in the heat position
switches on a glow plug. The glow plug warms the
engine induction manifold for cold weather starting.
Do not hold in this position for more than 15
seconds.
HS Start position. Operates the starter motor to turn the
engine.
To Next Page
Loading...
