Optional Attachments
Attachments for your Machine
182 182
9811-3400-4
Attachments for your Machine
!MCAUTION
If you have an attachment which is not covered in the
Operator Manual do not install it, use it or remove it
until you have obtained, read and understood the
pertinent information. Install attachments only on the
machines for which they were designed.
5-5-1-1_2
An attachment helps to increase the productivity of your
machine, for more information contact your JCB Dealer.
These attachments are designed to be used with the
Quickhitch:
– Standard Shovel
– Fork Frame and Pallet Forks
– Muck Fork and Grab.
Do not operate an attachment until you have read and fully
understand its operating instructions. Refer to the
manufacturers manual for the attachment (if supplied).
The standard installation and removal procedures for the
attachments are included in this section.
Important: Do not operate the attachment until the
hydraulic oil is at its normal working temperature.
To Next Page
Loading...
