Operation
Operating Environment
84 84
9811-3400-4
Operating in Coastal Regions
1 Check that all the plugs, bolts and fasteners are all
tightened correctly.
2 After daily operations, clean the machine thoroughly
and take special care when cleaning the electrical
devices and hydraulic cylinders to prevent salt entry
and eventual corrosion.
Operating on Wet or Soft Ground
1 Clean the machine.
Moisture or mud causes the paint, wiring and metallic
parts to deteriorate. When you operate the machine
keep it as dry as possible and regularly grease the
machine.
Cab Filters
There are three different filters available for the cab heater
unit/air-conditioning unit.
Important: The cab is pressurised, in dusty conditions the
doors and windows should be closed and ventilation
should be supplied through the heater unit. The cab filter is
provided for comfort only, it does not give complete
protection against the environment in which the machine is
used. The applicable personal protective equipment (PPE)
must be worn if the machine is used in hazardous
environments.
Standard Filter - Solid particle filter for general
applications which do not require special filtration.
Carbon Filter - Solid particle, odour filter.
P3 Filter - High level filtration of fine particles, organic
vapours, mists and fumes.
To Next Page
Loading...
