Operation
Seat Controls
26 26
9811-3400-4
Seat Controls
Introduction
T2-007_3
!MWARNING
Seat
Position the seat so that you can comfortably reach
the machine controls. Do not adjust the seat while the
machine is moving. You could have an accident if you
operate the machine with the seat in the wrong
position.
13-1-1-9_1
The operator's seat can be adjusted for your comfort. A
correctly adjusted seat will reduce operator fatigue.
Position the seat so that you can comfortably reach the
machine controls. For driving the machine, adjust the seat
so that you can depress the pedals fully with your back
against the seat back.
Suspension Seat (Type 1)
Note: Adjustments should only be made by the operator
when sat on the seat.
1 Horizontal Adjustment (Slide rails)
2 Height Adjustment Lever
Move the height adjustment lever 2 until the ride
height indicator 3 shows green (the comfort zone) on
the display 3a. Within the green band there is 75 mm
(3 in.) of height adjustment for any driver.
Note: The seat is designed so that it is unnecessary to
make any adjustment for the driver weight.
3 Ride Height Indicator. See Height Adjustment.
4 Backrest Angle Adjustment (if fitted).
5 Document Pocket
Fig 13.
To Next Page
Loading...
