Operation
Drive Controls, Switches and Instruments
37 37
9811-3400-4
Park Brake Lever (426, 436 Only)
!MCAUTION
The park brake must not be used to slow the machine
from travelling speed, except in an emergency,
otherwise the efficiency of the brake will be reduced.
Whenever the park brake has been used in an
emergency, always renew both brake pads.
4-2-1-1_2
Use this lever to engage the park brake before you leave
the machine.
Note: When the park brake is engaged, the transmission
is disconnected automatically.
To engage the park brake, pull the lever up as far as it will
go (past the vertical position). Make sure that the indicator
light on the instrument panel comes on.
When the park brake is engaged and the forward /reverse
lever is moved away from the neutral position:
– An audible warning will sound.
– The master warning light comes on.
– The "PARK BRAKE" message is shown.
To release the park brake, squeeze the release-button and
lower the lever slowly to the off position. Make sure that the
indicator light goes off.
Park Brake Switch (456 Only)
!MCAUTION
The park brake must not be used to slow the machine
from travelling speed, except in an emergency,
otherwise the efficiency of the brake will be reduced.
Whenever the park brake has been used in an
emergency, always renew both brake pads.
4-2-1-1_2
Use this switch to engage the park brake before you leave
the machine.
Note: When the park brake is engaged, the transmission
is disconnected automatically.
To engage the park brake, push the button. Make sure that
the indicator light on the instrument panel comes on.
When the park brake is engaged and the forward /reverse
switch is moved away from the neutral position:
– An audible warning will sound.
– The master warning light comes on.
– The "PARK BRAKE" message is shown.
To release the park brake, turn the button. Make sure that
the indicator light goes off.
Note: When the ignition is set to the OFF (O) position, the
park brake is engaged automatically. To release the park
brake, push the button to engage the park brake, then turn
the button to release the park brake.
To Next Page
Loading...
