Specifications
Static Dimensions
195 195
9811-3400-4
Table 25.
Note: Dimensions based on a machine equipped with the
standard 1.9m
3
shovel and 20.5R25 tyres.
HT ZX
mm (ft-in) mm (ft-in)
A Overall length (includes standard shovel) 6831 (22-5) 6831 (22-5)
B Axle to pivot pin 1096 (3-7) 1096 (3-7)
C Wheelbase 3000 (9-10) 3000 (9-10)
D Axle to counterweight face 1816 (5-11) 1816 (5-11)
E Minimum ground clearance 442 (1-5) 442 (1-5)
F Height over exhaust 3192 (10-6) 3192 (10-6)
G Width over cab 1400 (4-7) 1400 (4-7)
H Width over tyres 2482 (9-4) 2482 (9-4)
H1 Wheel track 1955 (6-5) 1955 (6-5)
J Height over cab 3335 (10-11) 3335 (10-11)
K Pivot pin height (maximum) 3906 (12-10) 3906 (12-10)
L Maximum operating height 5095 (16-9) 5095 (16-9)
M Shovel dump height 2848 (9-4) 2841 (9-4)
Degrees Degrees
N Axle oscillation 10.5 10.5
P Shovel dump angle at full height 49 45
Q Shovel crowd angle at full height 58 52
Articulation angle 40 40
kg (lb) kg (lb)
Unladen weight 12700 (27999) 12850 (28321)
To Next Page
Loading...
