Specifications
Static Dimensions
199 199
9811-3400-4
Table 27.
Note: Dimensions based on a machine equipped with the
standard 3.5m
3
shovel and 23.5R25 L3 tyres.
HT ZX
mm (ft-in) mm (ft-in)
A Overall length (includes standard shovel) 8520 (27-11) 8520 (27-11)
B Axle to pivot pin 1713 (5-7) 2182 (7-2)
C Wheelbase 3300 (10-10) 3300 (10-10)
D Axle to counterweight face 1970 (6-5) 1988 (6-6)
E Minimum ground clearance 470 (1-6) 470 (1-6)
F Height over exhaust 3260 (10-8) 3260 (10-8)
G Width over cab 1400 (4-7) 1400 (4-7)
H Width over tyres 2702 (8-10) 2702 (8-10)
H1 Wheel track 2100 (6-10) 2100 (6-10)
J Height over cab 3370 (11-1) 3370 (11-1)
K Pivot pin height (maximum) 4304 (14-1) 4677 (15-4)
L Maximum operating height 5768 (18-9) 6140 (20-2)
M Shovel dump height 3027 (9-11) 3416 (11-2)
Degrees Degrees
N Axle oscillation 12.5 12.5
P Shovel dump angle at full height 45 45
Q Shovel crowd angle at full height 57 53
Articulation angle 40 40
kg (lb) kg (lb)
Unladen weight 20371 (44910) 19281 (42507)
To Next Page
Loading...
