jcb 426 - Page 221

Specifications
Vibration Data
209 209
9811-3400-4
456
Table 37. Whole-Body Vibration Emission Under Representative Operating Conditions
(According to the intended use)
Whole-body vibration emission determined in accordance
with ISO 2631 - 1: 1997 for this machine type is 0.32 m/s
2
normalised to an 8 hour reference period [A(8)] and based
upon a test cycle "defined in SAE J1166".
Hand-arm vibration determined in accordance with
dynamic test conditions defined in ISO 5349-2:2001 does
not exceed 2.5 m/s
2
.
Note: Error bars are due to variations in vibration
emissions due to measurement uncertainty (50% in
accordance with EN 12096: 1997).
Machine Operating Duties
Dominant Axis (X, Y or Z)
T001260
Machine Operating Duties
0.03
0.17
0.55
0.32
0.37
m/s† A(8)
D1 D2 D3 D4 D5
YXXXX
D1 Low Idle
D2 Roading (Tarmac)
D3 Roading (Rough Terrain)
D4 Loader Work (Soil)
D5 Loader Work (Stone)