Operation
Visibility Aids
32 32
9811-3400-4
Side Mirrors
Check that the field of vision A is such that you can see,
using the mirrors at least a flat portion bounded on the left
and right of the machine, starting at the rear end of the
machine at a height of 1 metre above ground level and a
width of 0.75 metres (Z), continuing to a width of 3.5
metres (X) at ground level, 30 metres (Y) behind the rear
end of the machine.
T034390-1
Fig 20.
A Field of vision
B Centre point position
C Outer borderline
D Inner borderline
T Measurement at ground level
V Measurement at 1 metre above ground level
To Next Page
Loading...
