Operation
Working with the Machine
77 77
9811-3400-4
Lifting Operations on Slopes
!MWARNING
Conducting lifting operations on gradients can be
dangerous. The machine can become laterally
unstable and tip over if the instructions in this section
are not followed and understood. You and others can
be seriously injured or killed. Ensure you follow and
fully understand the guidelines given in this manual.
0019
!MWARNING
Stop the machine and apply the park brake before
conducting any lifting operations.
0020
Lifting operations should not be undertaken on slopes
unless the machine is level across its width (laterally level).
It is recommended that the machine should be operated on
firm, level ground wherever possible for maximum
machine stability. Where this is not possible a risk
assessment must be carried out by the operator before
attempting a lifting operation.
Make sure you have taken into account all factors that may
affect machine stability before a lifting operation is started
when working on a slope.
To Next Page
Loading...
