3 – 51
Change True Motion (TM) Mode to Relative Motion (RM) Mode
1 Press .
The True Motion mode is changed over to the Relative Motion mode, in which own ship will be
returned to the center of the radar display.
……Move Own Ship’s Display Position OFF CENTER ……………
Own ship’s position at the display center can be moved to a off centered position within 65% of
the display radius. This function is convenient to observe a wide coverage in any direction.
This Function is not Available on the 96 (or 120) NM Range
1 Press .
The cross cursor mark [ + ] will appear at the position of own ship on the radar display.
2 Move the cross cursor mark [ + ] (own ship’s position) to another position with the
trackball.
3 Click the trackball section left button.
Own ship’s position will move to the position of the cross cursor mark [ + ], where it will be fixed.
Return Own Ship’s Position to the Center
1 Press .
To Next Page
Loading...
