8 – 27
……Tuning Adjustment ……………………………………………………
1 If the AUTO TUNE mode is ON, change the mode to the Manual mode.
2 Set the range scale to 24 NM and adjust the [TUNE] control to the center.
3 Continue to press .
The CODE INPUT Menu will appear.
4 Press , then .
The ADJUST Menu will appear.
5 Press .
will be selected.
6 Using and , adjust the bar-graph
of the tuning indicator on the upper left of the display so that it becomes the
longest, and press to set it.
1 Press .
The ADJUST Menu will be closed.
To Next Page
Loading...
Need help?
General
