JRC JMA-9822-6XA - Reduce Radar Interference

3 – 75
1 Execute the procedures to display processed videos up to step 2.
2 Press .
will be set.
1 Press .
The Main Menu will be closed.
……Reduce Radar Interference …………………………………………
This function is used when the interference from other ship’s radar is strong.
1 Press .
The Main Menu will appear.
2 Press .
“ON” in “1.IR” will be set and the radar interference rejection
will be set to ON to reduce radar interference.
1 Execute the procedures to reduce radar interference
rejection up to step 2.
2 Press .
“OFF” in “1.IR” will be set and the radar interference rejection
will be set to OFF.
1 Press .
The Main Menu will be closed.
0
Exit
1
Cancellation
1
MENU
Procedures
0
Exit
1. OFF
1
Cancellation
● In watching a radar beacon mark or SART signal on the radar display, set the system to: IR OFF
(Radar Interference Rejection OFF)
Attention
2. PROC1
MAIN MENU
1.IR
2.TGT ENH
3.PROCESS
0.
EXIT
7.
DATA OFF
8.
SUB1 MENU
9.
DEGAUSS
1. FUNC OFF
4.FUNCTION
OFF ON
OFF ON
5.EBL1
CENTER OFFSET
6.EBL2
CENTER OFFSET