– xxii –
GLOSSARY
This section describes the main terms used for this equipment and general related maritime terms.
ARPA:
Automatic Radar Plotting Aid
AZI MODE (Azimuth Stabilization MODE):
Bearing display mode
Anti-clutter rain (FTC):
Rain/snow clutter suppression
Anti-clutter sea (STC):
Sea clutter suppression
BCR (Bow Cross Range):
Bow crossing range
BCT (Bow Cross Time):
Bow crossing time
BRG (Bearing):
Bearing
CPA (Closest Point of Approach):
The closest point of approach from own ship, which
can be set by the observer.
COG (Course Over Ground):
Course relative to the ground.
CUP (Course-Up):
Own ship’s course is pointed to the top center of the
radar display.
DRIFT:
The current velocity for manual correction or the
current speed on the horizontal axis of the 2-axis log
is displayed.
EBL (Electronic Bearing Line):
An electronic bearing line originated from own
ship’s position.
ENH (Enhance):
A target can be enlarged.
Floating EBL (Floating Electronic Bearing Line):
Floating electronic bearing line originated from an
arbitrary point.
GND:
Stabilization relative to the ground.
GPS (Global Positioning System):
The position of a GPS receiver can be determined by
the signals from GPS satellites.
Guard Zone:
Alarm ring against intrusion
HDG (Heading):
Own ship’s heading bearing.
The display ranges from 000 to 360 degrees as
scanned clockwise.
HL (Heading Line):
Ship’s heading line
HUP (Head-Up):
Own ship’s heading line is always pointed to the top
center of the radar display.
IMO:
International Maritime Organization
Interswitch:
A device to switch over two or more radar display
units and two or more antennas.
IR (Interference Reflector):
Radar interference reflector
MRK (Mark):
Reflection plot
NM (Nautical Mile):
1 NM = 1852 m
NSK (North Stabilization Kit):
True bearing unit
NUP (North-Up):
The north is always pointed to the top center of the
radar display.
OWN TRACK:
Display function of own ship’s track
Performance Monitor:
An additional unit to monitor the transmitted power
and the receiving sensitivity of radar equipment.
PI (Parallel Index Line):
Parallel index line
PIN (Personal Access Code):
Information set by the user (personal code)
PROC (Process):
Target processing function
Relative Vector:
A target’s movement predicted relative to own ship.
RR (Range Rings):
Fixed range ring
RM (Relative Motion):
Relative motion presentation
Own ship’s position is fixed and other targets move
relative to own ship.
S/X Band:
Radio frequency bands
S: 3 GHz band, X: 9 GHz band
SCANNER:
Antenna
To Next Page
Loading...
