JRC JMA-9822-6XA User Manual

5 – 34
5
5.10 ARPA SETTING
..
...
[
@@
] Approaching Target
Press , then to set the transmission mode.
will be set to generate a pseudo target at the true bearing of 0º and the relative
range of 6 NM. The target will then approach own ship at a relative speed of 10 kts in a relative
course of 180º. Characters “XX” appear blinking at the lower of the radar display, showing that the
system is executing the simulation mode.
Note: When the range between own ship and the pseudo target is 0, the target will
disappear.
6 When finishing the simulation, press to set the standby mode, then
press .
will be set.
1 Press or .
The TEST Menu will be closed.
Pseudo Target Parameters
TEST
0
Exit
1. OFF
1
TX
STBY
3. SCENARIO2
TX
STBY
3
MODE 1 2 3
Operation No indication Stop Approach
Range generated ---- 6 NM 6 NM
Speed ---- 0 KTS 10 KTS

JRC JMA-9822-6XA Specifications

General

Brand	JRC
Model	JMA-9822-6XA
Category	Marine Radar
Language	English