JRC JMA-9822-6XA User Manual

3 – 5
1 Repeat the procedures up to step 2 in case of using AUTO SEA.
2 Press .
will be set and “SEA ” at the lower left of the radar display will change to
“SEA ” and AUTO SEA mode will be cancelled.
In case of Using AUTO RAIN:
1 Press .
The AUTO Menu will appear.
2 Press .
will be selected and the pull-down menu will
appear.
3 Press .
will be set and “RAIN ” will appear
at the lower left of the radar display.
Note: When setting AUTO RAIN, the AUTO SEA is set to the MANUAL mode.
Both AUTO RAIN and AUTO SEA cannot be set at the same time.
1 Repeat the procedures up to step 2 in case of using AUTO RAIN.
2 Press .
will be set and “RAIN ” at the lower left of the radar display will
change to “RAIN ” and AUTO RAIN mode will be cancelled.
MAN
AUTO1. MANUAL
1
Cancellation
AUTO3. AUTO RAIN
3
1.SEA/RAIN
1
AUTO
Procedures
MAN
AUTO1. MANUAL
1
Cancellation
2.TUNE
MA
3. AUTO RAIN
AUTO
1.SEA/RAIN
0.
EXIT
1. MANUAL
2. AUTO SEA
3. AUTO RAIN

JRC JMA-9822-6XA Specifications

General

Brand	JRC
Model	JMA-9822-6XA
Category	Marine Radar
Language	English