2011-07-01/00561073 [SCR Power Controller TYA202] 13
1 Introduction
1.5 Standards, approvals and conformity
Test basis for the device characteristics is the Low Voltage Directive DIN EN
50178.
Test basis for the EMC Directive is DIN EN 61326-1.
Standard
Electrical connection DIN VDE 0100
Protection rating IP 20 panel-
mounting devices
DIN EN 60529
Climatic ambient conditions Class 3K3
Air temperature and rel. humidity DIN EN 60721-3-3
Storage temperature Class 1K5 DIN EN 60721-3-1
Operating conditions
Pollution degree
Overvoltage category
DIN EN 50178
Test voltages
Impulse withstand voltage
AC voltage RMS
DIN EN 50178
Residual current circuit breaker DIN EN 50178
Electromagnetic compatibility
Emitted interference
Interference resistance
DIN EN 61326-1
Class A- For industrial applications only
Industrial requirements
Mechanical tests/inspections:
Vibration test 3M2
Toppling test Class 2M1
IN EN 60068-2-6, DIN EN 60721-3-3
DIN EN 60068-2-31, DIN EN 60721-3-2
Inscriptions/labels, marking DIN EN 50178, DIN EN 61010-1
Approvals Standard
cUL applied for
(not for type: 70.9061/8-0X-20...)
508C Power Conversation Equipment
(Category NRNT2)
C22.2 NO. 14-05 Industrial Control Equipment
(Category NRNT8)
CE conformity Low Voltage Directives 2006/95/EC
Marking Directives 93/68 EEC
EMC Directives 2004/108/EC
Conformity Standard
RoHs 2002 / 95 EC
To Next Page
