JUMO TYA 202 - 1 Introduction; Preface

2011-07-01/00561073 [SCR Power Controller TYA202] 7
1 Introduction
1.1 Preface
Please read this operating manual before starting up the device.
This operating manual is valid from device software version [256.01.02].
Keep the operating manual in a place accessible to all users at all times.
We welcome any suggestions you may have to help us improve this operating
manual.
Phone +49 661 6003-727
Fax +49 661 6003-508
Service hotline For technical questions
Phone support in Germany:
Phone: +49 661 6003-300 or -653 or -899
Fax: +49 661 6003-881729
Email: service@jumo.net
Austria:
Phone: +43 1 610610
Fax: +43 16106140
Email: info@jumo.at
Switzerland:
Phone: +41 1,928 24 44
Fax: +41 1 928 24 48
Email: info@jumo.ch
A
The power controller produces the power required at the analog input or in
manual mode. Safety devices operating independently of the power controller
must be fitted to safely switch off the downstream heating process in the event
of temperature overranges.
A
The power controller may only be operated with original JUMO semi-
conductor fuses.
Please check that the correct spare part has been used during fuse
replacement.
H
All necessary settings are described in this Operating Manual.
If the power controller is handled in any way that is not described in the
Operating Manual or that is expressly forbidden, this will jeopardize your
warranty rights.
Please contact the nearest subsidiary or the head office should you encounter
any problems.
B