JUMO TYA 202 - Device Data; Temperature Unit; Display Contrast; Switch off

5 Configuration
48 2011-07-01/00561073 [SCR Power Controller TYA202]
5.1.1 Device data
Basic settings for display and temperature unit
5.1.2 Power controller
Settings for the area of application of the power controller
Value/settings Description
Temperature unit
°C Defines the unit for displayed temperatures, such as the
device temperature.
°F
Display contrast
0...50...100 % Light/dark contrast setting
Switch off
display light
0000...1440 min The background lighting of the display is switched off after the
set number of minutes. LED Power (green) flashes.
0000 means: Background lighting is always switched on
Apply factory
settings
Apply now? The factory settings are restored when the PGM key is
pressed.
k / Bold = factory setting
Value/settings Description
SCR control Continuous (power
controller)
The power controller regulates the power for the load continu-
ously depending on the default set point value.
Logic (switch) The power controller behaves like a switch and regulates the
power by switching ON or OFF.
k/ bold = factory setting