4 Operation
42 2011-07-01/00561073 [SCR Power Controller TYA202]
4.1.4 Display of error messages and particular statuses
Cyclic
display
The symbols for input, cascade control and operating mode are displayed
alternately in the info line together with error messages or information about
particular statuses.
v Chapter 8 „Fault messages and alarms“
Examples
All parameters for the maximum device extension level are listed in the
following tables. Depending on the order specifications (see type plate or
device information) or current configuration, any parameters that are not
required are masked out.
To Next Page
Loading...
