JUMO TYA 202 - Changing Codes; Code Manual Mode; Code User Level; Code Config.level

5 Configuration
62 2011-07-01/00561073 [SCR Power Controller TYA202]
5.1.10 PROFIBUS-DP
Interface parameter for PROFIBUS-DB (see separate manual)
5.1.11 Changing codes
It is possible to enter passwords (4-digit numeric codes) for manual mode,
operator level and configuration level to protect them from unauthorized
access.
Value/settings Description
Device address
1 ...125 If a "0" is set for the device address, the bus fault error
message is not displayed.
Data format
Motorola, Intel
k / Bold = factory setting
Value/settings Description
Code Manual mode 0000 ... 9999
0000 means: No inhibit
9999 means: Level is hidden
Code User level
0000 ... 9999 0000 means: No inhibit
9999 means: Level is hidden
Code Config.level
0000 ... 9999 0000 means: No inhibit
k / Bold = factory setting