Juniper EX9214 Hardware Guide

• For switches with AC power supplies, allow at least 24 in. (61 cm) of clearance in front of the switch
and at least 26.85 in. (68.2 cm) of clearance behind the switch. Allow 2.8 in. (7.1 cm) between the
side of the chassis and any non-heat-producing surface such as a wall. See Figure 41 on page 130.
Figure 41: Clearance Requirements for Airow and Hardware Maintenance for an EX9214 Switch
with AC Power Supplies
130

Juniper EX9214 Specifications

General

Brand	Juniper
Model	EX9214
Category	Switch
Language	English