Juniper EX9214

8. Set the user account class to super-user.
[edit]
root@# set system login user user-name class super-user
9. Congure the switch’s domain name.
[edit]
root@# set system domain-name domain-name
10. Congure the IP address and prex length for the switch’s Ethernet interface.
[edit]
root@# set interfaces fxp0 unit 0 family inet address address/prefix-length
11. Congure the IP address of a DNS server.
[edit]
root@# set system name-server address
12. (Oponal) Congure the stac routes to remote subnets with access to the management port.
Access to the management port is limited to the local subnet. For more informaon about stac
routes, see the Junos OS Administraon Library for Roung Devices.
[edit]
root@# set routing-options static route remote-subnet next-hop destination-IP retain no-
readvertise
13. Congure the telnet service at the [edit system services] hierarchy level.
[edit]
root@# set system services telnet
14. (Oponal) Display the conguraon to verify that it is correct.
[edit]
root@# show
system {
host-name host-name ;
198