Holding a Line Card | 247
Storing a Line Card | 249
Maintaining Line Card Cables | 250
Unpacking a Line Card Used in an EX9200 Switch | 250
Removing a Line Card from an EX9200 Switch | 251
Installing a Line Card in an EX9200 Switch | 254
Removing a MIC from an EX9200-MPC Line Card | 256
Installing a MIC in an EX9200-MPC Line Card | 260
Maintain Transceivers | 265
Remove a Transceiver | 266
Install a Transceiver | 268
Maintaining Alarm Relay Wire | 271
Disconnecng the Alarm Relay Wires from the Cra Interface in an EX9200 Switch | 272
Connecng the Alarm Relay Wires to the Cra Interface in an EX9200 Switch | 272
Maintain Fiber-Opc Cables | 274
Connect a Fiber-Opc Cable | 274
Disconnect a Fiber-Opc Cable | 275
How to Handle Fiber-Opc Cables | 276
Removing an EX9214 from a Rack or Cabinet | 277
Powering O an EX9200 Switch | 277
Removing an EX9200 Switch from a Rack or Cabinet Using a Mechanical Liî™› | 278
Maintaining the EX9214 Cable Management Bracket | 279
Removing the Cable Management Bracket from an EX9214 Switch | 279
Installing the Cable Management Bracket in an EX9214 Switch | 281
Troubleshoong
Hardware
Troubleshoong EX9200 Components | 284
Troubleshoong the Cooling System in an EX9200 Switch | 284
viii
To Next Page
Loading...
Need help?
General
