Juniper EX9214 Hardware Guide

Removing an AC Power Supply from an EX9214 Switch | 213
Installing an AC Power Supply in an EX9214 Switch | 216
Removing a DC Power Supply from an EX9214 Switch | 218
Installing a DC Power Supply in an EX9214 Switch | 221
Maintaining Power Supplies in EX9200 Switches | 223
Maintaining the EX9200 Host Subsystem | 224
Taking the Host Subsystem Oine in an EX9200 Switch | 225
Removing an RE Module from an EX9200 Switch | 226
Installing an RE Module in an EX9200 Switch | 227
Upgrading an EX9200-SF to an EX9200-SF2 | 229
Preparing the EX9200 Switch for an EX9200-SF2 Upgrade | 230
Powering O the Switch | 230
Removing a Roung Engine from an EX9200-SF Module | 230
Replacing the EX9200-SF with the EX9200-SF2 | 231
Installing a Roung Engine into an EX9200-SF2 | 231
Powering On the Switch | 231
Compleng the EX9200-SF2 Upgrade | 231
Upgrading to an EX9200-SF3 | 233
Preparing the EX9200 Switch for an EX9200-SF3 Upgrade | 234
Powering O the Switch | 234
Removing a Roung Engine from an SF Module | 234
Replacing the EX9200-SF or EX9200-SF2 with the EX9200-SF3 | 234
Installing a Roung Engine into an EX9200-SF3 | 235
Powering On the Switch | 235
Compleng the EX9200-SF3 Upgrade | 235
Removing an SF Module from an EX9200 Switch | 236
Installing an SF Module in an EX9200 Switch | 238
Maintaining the Host Subsystem in EX9200 Switches | 242
Maintaining the EX9200 Line Cards | 246
Handling and Storing Line Cards | 246
vii

Juniper EX9214 Specifications

General

Brand	Juniper
Model	EX9214
Category	Switch
Language	English