Installing a Mounng Shelf in a Rack or Cabinet for an EX9214 Switch | 155
Moving the Mounng Brackets for Center-Mounng an EX9200 Switch | 158
Mounng an EX9200 Switch on a Rack or Cabinet Using a Mechanical Li | 160
Connecng the EX9214 to Power | 164
Connect Earth Ground to an EX Series Switch | 164
Connecng AC Power to an EX9214 Switch | 174
Powering On an AC-Powered EX9200 Switch | 177
Connecng DC Power to an EX9214 Switch | 179
Powering On a DC-Powered EX9200 Switch | 184
Connecng the EX9200 to External Devices | 186
Connecng an EX9200 Switch to a Network for Out-of-Band Management | 187
Connecng an EX9200 Switch to a Management Console or an Auxiliary Device | 188
Connecng the EX9200 Switch to an External Alarm-Reporng Device | 189
Connecng the EX9200 to the Network | 190
Install a Transceiver | 190
Connect a Fiber-Opc Cable | 193
Conguring Junos OS on the EX9200 | 194
EX9200 Switch Default Conguraon | 194
Connecng and Conguring an EX9200 Switch (CLI Procedure) | 195
Maintaining Components
Roune Maintenance Procedures for EX9200 Switches | 202
Maintaining the EX9200 Cooling System | 202
Removing a Fan Tray from an EX9200 Switch | 203
Installing a Fan Tray in an EX9200 Switch | 205
Maintaining the Fan Tray in EX9200 Switches | 209
Maintaining the Air Filter in EX9200 Switches | 211
Maintaining the EX9214 Power System | 212
vi
To Next Page
Loading...
Need help?
General
