EasyManuals Logo

Juniper SRX100 Hardware Guide

Juniper SRX100
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Chapter 1
Introduction to the SRX100 Services
Gateway
This chapter includes the following sections:
SRX100 Services Gateway Description on page 3
SRX100 Services Gateway Features and Functions on page 4
SRX100 Services Gateway Description
This topic includes the following sections:
About the SRX100 Services Gateway on page 3
Accessing the SRX100 Services Gateway on page 3
About the SRX100 Services Gateway
The Juniper Networks SRX100 Services Gateway offers features that provide complete
functionality and flexibility for delivering secure Internet and intranet access. The
services gateway offers stable, reliable, and efficient IP routing in addition to switching
support and LAN connectivity. The device provides Internet Protocol Security (IPsec),
virtual private network (VPN), and firewall services for small-sized and medium-sized
companies and enterprise branch and remote offices. The SRX100 Services Gateway
can be connected directly to a traditional private networks such as leased lines, Frame
Relay, or Multi Protocol Label Switching (MPLS) networks or to the public Internet.
The SRX100 Services Gateway runs the JUNOS operating system.
Accessing the SRX100 Services Gateway
Two user interfaces are available for monitoring, configuring, troubleshooting, and
managing the SRX100 Services Gateway:
J-Web interface: Web-based graphical interface that allows you to operate a
services gateway without commands. The J-Web interface provides access to all
JUNOS functionality and features.
JUNOS command-line interface (CLI): Juniper Networks command shell that runs
on top of a UNIX-based operating system kernel. The CLI is a straightforward
command interface. On a single line, you type commands that are executed
SRX100 Services Gateway Description 3

Table of Contents

Other manuals for Juniper SRX100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper SRX100 and is the answer not in the manual?

Juniper SRX100 Specifications

General IconGeneral
Routing protocolsBGP, IS-IS, MPLS, OSPF
Switching protocolsVLAN 802.1Q, 802.3ad/LACP, STP
Supported network protocolsIPv4, IPv6, CLNS
Firewall securityYes
Security algorithms3DES, DES
Authentication methodRADIUS, RSA SecureID, LDAP
VPN supportIPsec VPN
Data transfer rate0.1 Gbit/s
Input voltage100 - 240 V
Input frequency50/60 Hz
Heat dissipation35 BTU/h
Power requirements100-240, 50/60
Power over Ethernet (PoE)No
Power consumption (typical)30 W
SafetyUL 60950-1, CSA 60950-1, AS / NZS 60950-1, AS / NZS 60950-1, CB Scheme, EN 60950-1
CertificationFCC Class B ICES class B AS / NZS CISPR22 Class B AS / NZS CISPR22 Class B VCCI Class B EN 55022 Class B, EN 300386
Mounting typeRack mounting
Internal memory1024 MB
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Weight and Dimensions IconWeight and Dimensions
Weight1100 g
Dimensions (WxDxH)216 x 147 x 36 mm

Related product manuals