EasyManuals Logo

Juniper SRX100 Hardware Guide

Juniper SRX100
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
Chapter 8
Installing the SRX100 Services Gateway
This chapter includes the following sections:
SRX100 Services Gateway Safety Requirements, Warnings, and
Guidelines on page 39
Installing the SRX100 Services Gateway on page 39
SRX100 Services Gateway Safety Requirements, Warnings, and Guidelines
To avoid harm to yourself or the device as you install and maintain it, follow the
guidelines for working with and near electrical equipment, as well as the safety
procedures for working with devices. For a discussion of how to make the installation
site a safe environment and a list of safety warnings, see Related Topics.
NOTE: Providing an exhaustive set of guidelines for working with electrical equipment
is beyond the scope of this guide.
Related Topics SRX100 Services Gateway General Safety Guidelines and Warnings on page 93
SRX100 Services Gateway Electrical Safety Guidelines and Warnings on page 109
Required Tools and Parts for Installing and Maintaining the SRX100 Services
Gateway on page 29
Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 35
Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 36
Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 37
General Site Guidelines for Installing the SRX100 Services Gateway on page 19
Installing the SRX100 Services Gateway
This topic includes the following sections:
Installing the SRX100 Services Gateway in a Rack on page 40
Installing the SRX100 Services Gateway on a Desk on page 42
Installing the SRX100 Services Gateway on a Wall on page 43
SRX100 Services Gateway Safety Requirements, Warnings, and Guidelines 39

Table of Contents

Other manuals for Juniper SRX100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper SRX100 and is the answer not in the manual?

Juniper SRX100 Specifications

General IconGeneral
Routing protocolsBGP, IS-IS, MPLS, OSPF
Switching protocolsVLAN 802.1Q, 802.3ad/LACP, STP
Supported network protocolsIPv4, IPv6, CLNS
Firewall securityYes
Security algorithms3DES, DES
Authentication methodRADIUS, RSA SecureID, LDAP
VPN supportIPsec VPN
Data transfer rate0.1 Gbit/s
Input voltage100 - 240 V
Input frequency50/60 Hz
Heat dissipation35 BTU/h
Power requirements100-240, 50/60
Power over Ethernet (PoE)No
Power consumption (typical)30 W
SafetyUL 60950-1, CSA 60950-1, AS / NZS 60950-1, AS / NZS 60950-1, CB Scheme, EN 60950-1
CertificationFCC Class B ICES class B AS / NZS CISPR22 Class B AS / NZS CISPR22 Class B VCCI Class B EN 55022 Class B, EN 300386
Mounting typeRack mounting
Internal memory1024 MB
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Weight and Dimensions IconWeight and Dimensions
Weight1100 g
Dimensions (WxDxH)216 x 147 x 36 mm

Related product manuals