Verifying Parts Received with the SRX100 Services Gateway
The SRX100 Services Gateway shipment package contains a packing list. Check the
parts in the shipment against the items on the packing list. The packing list specifies
the part numbers and descriptions of each part in your order.
If any part is missing, contact your Juniper Networks customer service representative.
A fully configured SRX100 Services Gateway contains the chassis with installed
components, listed in Table 16 on page 32, and an accessory box, which contains
the parts listed in Table 17 on page 32.
NOTE: The parts shipped with your device can vary depending on the configuration
you ordered.
Table 16: Parts List for a Fully Configured SRX100 Services Gateway
QuantityComponent
1Chassis, with 8xFE ports
1Power supply adapter (30W)
12-prong power cord
1DB-9 to RJ-45 adapter, straight through, 7 ft.
Table 17: Accessory Parts List for the SRX100 Services Gateway
QuantityPart
1Juniper Networks Product Warranty
1End User License Agreement
1Getting Started Guide
1Security Products Safety Guide
1Juniper Compliance Form Letter
1Product Registration
NOTE: The mounting kits available for rack, desk, and wall installation of the SRX100
Services Gateway must be ordered separately. Contact your Juniper Networks
customer service representative for more information.
32 ■ Verifying Parts Received with the SRX100 Services Gateway
SRX100 Services Gateway Hardware Guide