Juniper SRX100 Hardware Guide

Part 2
Setting Up the SRX100 Services Gateway
■ Preparing the Site for SRX100 Services Gateway Installation on page 17
■ Installation Overview for the SRX100 Services Gateway on page 25
■ Required Tools and Parts for Installing and Maintaining the SRX100 Services
Gateway on page 29
■ Unpacking the SRX100 Services Gateway on page 31
■ Preparing the SRX100 Services Gateway for Installation on page 35
■ Installing the SRX100 Services Gateway on page 39
■ Connecting, Grounding, and Powering On the SRX100 Services
Gateway on page 45
■ SRX100 Services Gateway Memory Upgrade on page 51
■ SRX100 Services Gateway Autoinstallation on page 53
■ Establishing Basic Connectivity for the SRX100 Services Gateway on page 55
Setting Up the SRX100 Services Gateway ■ 15

Juniper SRX100 Specifications

General

Routing protocols	BGP, IS-IS, MPLS, OSPF
Switching protocols	VLAN 802.1Q, 802.3ad/LACP, STP
Supported network protocols	IPv4, IPv6, CLNS
Firewall security	Yes
Security algorithms	3DES, DES
Authentication method	RADIUS, RSA SecureID, LDAP
VPN support	IPsec VPN
Data transfer rate	0.1 Gbit/s
Input voltage	100 - 240 V
Input frequency	50/60 Hz
Heat dissipation	35 BTU/h
Power requirements	100-240, 50/60
Power over Ethernet (PoE)	No
Power consumption (typical)	30 W
Safety	UL 60950-1, CSA 60950-1, AS / NZS 60950-1, AS / NZS 60950-1, CB Scheme, EN 60950-1
Certification	FCC Class B ICES class B AS / NZS CISPR22 Class B AS / NZS CISPR22 Class B VCCI Class B EN 55022 Class B, EN 300386
Mounting type	Rack mounting
Internal memory	1024 MB
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	1100 g
Dimensions (WxDxH)	216 x 147 x 36 mm