Juniper SRX100 Hardware Guide

Table 15: Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway (continued)
Related TopicTools and PartsTask
“Packing the SRX100 Services Gateway
and Components for Shipment” on page
126
■
Electrostatic bag or antistatic mat,
for each component
■
Electrostatic discharge (ESD)
grounding wrist strap
■
Flat-blade screwdriver,
approximately 1/4 in (6 mm)
■
Phillips (+) screwdrivers, numbers
1 and 2
Packing the SRX100 Services Gateway
Related Topics ■ Unpacking the SRX100 Services Gateway on page 31
■ Installing the SRX100 Services Gateway in a Rack on page 40
■ Installing the SRX100 Services Gateway on a Desk on page 42
■ Installing the SRX100 Services Gateway on a Wall on page 43
■ Grounding the SRX100 Services Gateway on page 47
■ Connecting the SRX100 Services Gateway to the Power Supply on page 45
■ Packing the SRX100 Services Gateway and Components for Shipment on page
126
30 ■ Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
SRX100 Services Gateway Hardware Guide

Juniper SRX100 Specifications

General

Routing protocols	BGP, IS-IS, MPLS, OSPF
Switching protocols	VLAN 802.1Q, 802.3ad/LACP, STP
Supported network protocols	IPv4, IPv6, CLNS
Firewall security	Yes
Security algorithms	3DES, DES
Authentication method	RADIUS, RSA SecureID, LDAP
VPN support	IPsec VPN
Data transfer rate	0.1 Gbit/s
Input voltage	100 - 240 V
Input frequency	50/60 Hz
Heat dissipation	35 BTU/h
Power requirements	100-240, 50/60
Power over Ethernet (PoE)	No
Power consumption (typical)	30 W
Safety	UL 60950-1, CSA 60950-1, AS / NZS 60950-1, AS / NZS 60950-1, CB Scheme, EN 60950-1
Certification	FCC Class B ICES class B AS / NZS CISPR22 Class B AS / NZS CISPR22 Class B VCCI Class B EN 55022 Class B, EN 300386
Mounting type	Rack mounting
Internal memory	1024 MB
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	1100 g
Dimensions (WxDxH)	216 x 147 x 36 mm