Programming and Auditing Locks
5–4 PKG 3114 0106
E-Plex Advanced ACS User’s Guide
4. On the pushbuttons, enter one of the following sequences as applicable:
# Master PIN # 900#
# Manager PIN # 900#
# M-Unit PIN #
Note: Hereinafter, these codes will be referred to as credentials.
5. The lock now enters the Communication Mode, indicated by alternate green and red
LEDs flashing every second for up to 30 seconds.
6. Tap the E-Plex ACS icon on the M-Unit screen.
7. The M-Unit displays the E-Plex ACS main screen, where you can select Program or
Audit.
To Next Page
Loading...
