Getting Starte
E-Plex Advanced ACS User’s Guide
PKG 3114 0106 2–19
4. In the Password for Level 1 Operator field, type a password for the new operator.
Note: The password must be between six and ten characters. The password is case-
sensitive.
5. In the Verify Password for Level 1 Operator field, re-type the new password for
confirmation.
Note: Be sure to make a note of the password that was specified. If it is lost, you will
have to reinstall your E-Plex Advanced ACS software, or call Kaba Access Control’s
Technical Support line for assistance. It is recommended that you create another
operator for the software so that you have more than one entry path into the software.
6. Click OK. The software displays the following message:
7. Click OK. The software displays the following message:
8. Click OK. The software prompts you to change the factory default eight-digit Master PIN
to some other eight-digit Master PIN.
Note: You must change the factory default Master PIN—12345678—to some other
eight-digit PIN, both here in the software and at the lock pushbutton/keypad. Otherwise,
you cannot use the E-Plex Advanced ACS lock system.
9. Click OK. The software displays the New Master PIN window:
10. In the Master PIN field, type the new global Master User PIN for all locks.
Note: The Master PIN must be eight digits long.
To Next Page
Loading...
Need help?
General
