KCP Heavy Industries Co., Ltd. Guide to the Operating Instructions
1 - 3
1.2 Icons and symbols
The following icons and symbols are used in the Operating Instructions:
► Task symbol
Text following this symbol describes tasks that you are required to work through, generally
from top to bottom in the sequence shown.
Text following this symbol describes the result or effect of an action.
Refer also to the maintenance cards
The following special tools are required:
This icon identifies the special tools necessary to carry out the work. Normal tools,
i.e. commercially available tools or tools carried in the truck, are not specially listed.
Environmental protection _________________________________________________
Particular information regarding environmental protection The icon shown, the words
Environmental protection printed in bold, and a line will start and finish the paragraph.
_________________________________________________________________________
Note _____________________________________________________________________
Particular information regarding the economic use of the machine is introduced with
the icon illustrated, the word Note printed in bold, and a line will start and finish the
paragraph.
_________________________________________________________________________
Caution __________________________________________________________________
Particular information or rules or prohibitions intended to prevent damage area
introduced with the icon illustrated, the word caution printed in bold, and a line will
start and finish the paragraph.
_________________________________________________________________________
To Next Page
Loading...