EasyManua.ls Logo

KCP 113 - Manual Lubrication; Automatic Lubrication System

Default Icon
107 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KCP Heavy Industries Co., Ltd Maintenance
7-6
Danger _________________________________________________________________
Never mix hydraulic fluids with different characteristics, i.e. do not mix biologically
degradable hydraulic fluid with mineral hydraulic fluids etc.
_______________________________________________________________________
Note ___________________________________________________________________
Please only use a hydraulic fluid complying with the requirements standard specified in the
lubricant recommendation for topping up or a full fluid change. Observe the manufacturer’s
information in doing so.
Approximately 2 % of the old hydraulic fluid will remain in the lines and cylinders after a full
fluid change.
_______________________________________________________________________
7.3.2 Manual lubrication
Use multipurpose lithium base grease for lubrication.
Marking in accordance with NLGI Class 2.
7.3.3 Automatic lubrication system
Fill the centralized lubrication system with multipurpose lithium base grease.
Marking in accordance with NLGI Class 2
Environmental protection _________________________________________________
You must carefully collect all functional fluids, e.g. used oil (including biologically
degradable oils), filters and auxiliary materials and dispose of them separately from other
waste. You must keep used oils of various types separate in order to keep disposal costs
as low as possible.
Observe the national regional regulations applicable to your area. Only work with waste
disposal companies who are approved by the local authorities.

Table of Contents