KCP 113 - When Pumping Is Not Functioning

KCP Heavy Industries Co., Ltd. Troubleshooting
6-14
6.2.4.2 When pumping is not functioning
Notice __________________________________________________________________________
Pumping is not functioning when emergency mode.
________________________________________________________________________________
Possible cause
Check point
Diagnosis
Solution
Maintenance
level
※ Maintenance level : A(Repair at KCP service workshop), B(KCP engineer dispatch or phone call)
Pumping sol.
failure
Main panel
F9 fuse
• Firstly check wiring of
pumping sol.
• Check main panel
Fuse F9, if burnt.
B
Pumping
sol v/v
• Check main panel
fuse F9.
• Try to operate the
machine with
manual override
• A/S serviceman
dispatch
B
Sensing ball
v/v closed
Ball v/v
• Check if ball v/v is
open.
• Open ball v/v if
closed.
B