Keba ServoOne junior Device Help

17Enhanced/additionalfunctions
Chapter overview
Pictogram 
Navigation 
Brief description Thischapterdescribes"Reloadingindividualparameters"and
"Uploadinganddownloadingparameterdatasets".
Contents
17.1 Reloading individual parameters 477
17.2 Upload and download of parameter data sets 481
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
477
17 Enhanced/additional functions
17.1Reloadingindividualparameters
The parameters P 97 - PARA_DataSetLdCfg, P 98 - PARA_DataSetLdIDand P 99 -
PARA_DataSetLdVal provide the option of adapting individual parameter values as
needed.
The parameters and values to be loaded can be defined by means of special
character strings and assigned to an associated data set ID. Determination of the
data set ID can be accomplished by means of digital inputs or a parameter, for
example. One possible application would be storing two motor data sets in one
device which can be switched over in dependence on a certain event.
17.1.1Parametersused
P 97 - PARA_DataSetLdCfg
The parameter P 97 - PARA_DataSetLdCfg is used to activate the function and to
make the general settings for the generation of the data set ID.
P 98 - PARA_DataSetLdID
The desired data set IDs are entered in P 98 - PARA_DataSetLdID. Up to 100
entries can be made (subindex 0 ....99). The parameter ID entered here makes
reference to the subindex in PARA_DataSetLdVal via the associated subindex of
PARA_DataSelLdID.
P 99 - PARA_DataSetLdVal
The character strings associated with the respective data set IDs (linked via the
subindex with P 98) which define the parameters and values to be loaded are
entered in P 99 - PARA_DataSetLdVal.

Keba ServoOne junior Specifications

General

Brand	Keba
Model	ServoOne junior
Category	Controller
Language	English