KEISOKU GIKEN LOAD EDGE Series - Page 70

Load Edge Series
70 Operations for Load Mode
Appendix:1) Setting command
1) Initialize command
SQI no argument
Function Clear all data to “0”
2) Load setting data
SQD [Data index No. (1-1024)],[Slew rate],[Load setting]
Function: Set each loading condition
3) Execute condition
SQU [No. of loops, 1 – 65535, 0 for continue],[data index no.(1 –
1024)],[output data no. (1 – 1024)]
4) Start / Stop
SQC [start (1) / stop (0)]