Keithley 2016 - Digits Command

:DIGits command
:DIGits <n>
[:SENSe[1]]:CURRent:AC:DIGits <n> Specify resolution for ACI
[:SENSe[1]]:CURRent:DC:DIGits <n> Specify resolution for DCI
[:SENSe[1]]:VOLTage:AC:DIGits <n> Specify resolution for ACV
[:SENSe[1]]:VOLTage:DC:DIGits <n> Specify resolution for DCV
[:SENSe[1]]:RESistance:DIGits <n> Specify resolution for Ω2
[:SENSe[1]]:FRESistance:DIGits <n> Specify resolution for Ω4
[:SENSe[1]]:PERiod:DIGits <n> Specify resolution for PER
[:SENSe[1]]:FREQuency:DIGits <n> Specify resolution for FREQ
[:SENSe[1]]:TEMPerature:DIGits <n> Specify resolution for TEMP
[:SENSe[1]]:DISTortion:DIGits <n> Specify resolution for distortion
Parameters <n> = 4 3½-digits
54
½-digits
65
½-digits
76
½-digits
DEFault 6
½-digits for DCI, DCV, Ω2, Ω4, FREQ, PER
5
½-digits for ACI, ACV, TEMP, distortion
MINimum 3
½ for DCI, ACI, ACV, DCV, Ω2, Ω4, TEMP, distortion
MAXimum 6
½-digits for DCI, ACI, ACV, DCV, Ω2, Ω4, TEMP,
distortion
Query :DIGits? Query selected resolution
:DIGits? DEFault Query *RST default resolution
:DIGits? MINimum Query minimum allowable resolution
:DIGits? MAXimum Query maximum allowable resolution
Description These commands are used to select display resolution for the specified
measurement function.
Even though the parameters for this command are expressed as integers (4 to
7), you can specify resolution using real numbers. For example, to select
3
½-digit resolution let <n> = 3.5, for 4½-digit let <n> = 4.5, and so on.
Internally, the instrument rounds the entered parameter value to the nearest
integer.
5-44 SCPI Command Reference