6 Input connections
INPUT HI and LO Used for making DC volts, AC volts, 2-wire resistance measurements.
AMPS Used in conjunction with INPUT LO to make DC current and AC
current measurements. Also holds current input fuse (3A, 250V, fast
blow, 5×20mm).
SENSE
Ω4 WIRE Used with INPUT HI and LO to make 4-wire resistance measure-
HI and LO ments.
7 INPUTS
Selects input connections on front or rear panel.
8 Handle
Pull out and rotate to desired position.
Basic Measurements 2-5
To Next Page
Loading...
