System operations
The Model 2016 has other front panel operations. Saving and restoring setup information is
described in Section 2 — Basic Measurements. Selecting the remote interface and language is
covered in Section 4 — Remote Operation.
Calibration
The CAL selections are used to view the calibration date and next due date, to perform
calibration, and to view the number of times calibration has been performed. Some of the items
are password-protected to prevent unintended changing of calibration constants.
To view the calibration dates, press SHIFT-CAL. Press ENTER at the DATES prompt. The
first date is the last time calibration was performed. The NDUE date is the calibration due date.
Running calibration is password-protected. Refer to the Model 2016 Service Manual for
details.
To view the calibration count, press ENTER at the COUNT prompt.
3-26 Measurement Options
To Next Page
Loading...
