Model 8604 SMD Probe Set:
Consists of two test leads (0.9m), each terminated with a
surface mount device “grabber” clip on one end and a banana plug with a retractable sheath on
the other end.
Low thermal probes
Model 8610 Low Thermal Shorting Plug:
Consists of four banana plugs mounted to a
1-inch square circuit board, interconnected to provide a short circuit among all plugs.
Cables and adapters
Models 7007-1 and 7007-2 Shielded GPIB Cables:
Connect the Model 2016 to the GPIB
bus using shielded cables and connectors to reduce electromagnetic interference (EMI). The
Model 7007-1 is 1m long; the Model 7007-2 is 2m long.
Models 8501-1 and 8501-2 Trigger Link Cables:
Connect the Model 2016 to other
instruments with Trigger Link connectors (e.g., Model 7001 Switch System). The Model 8501-1
is 1m long; the Model 8501-2 is 2m long.
Model 8502 Trigger Link Adapter:
Allows
you to connect any of the six Trigger Link lines
of the Model 2016 to instruments that use the standard BNC trigger connectors.
Model 8504 DIN to BNC Trigger Cable:
Allows you to connect Trigger Link lines one
(Voltmeter Complete) and two (External Trigger) of the Model 2016 to instruments that use
BNC trigger connectors. The Model 8504 is 1m long.
Rack mount kits
Model 4288-1 Single Fixed Rack Mount Kit:
Mounts a single Model 2016 in a standard
19-inch rack.
Model 4288-2 Side-by-Side Rack Mount Kit:
Mounts two instruments (Models 182, 428,
486, 487, 2000, 2001, 2002, 2010, 2015, 2016, 6514, 6517, 7001) side-by-side in a standard
19-inch rack.
Model 4288-3 Side-by-Side Rack Mount Kit:
Mounts a Model 2016 and a Model 199
side-by-side in a standard 19-inch rack.
Model 4288-4 Side-by-Side Rack Mount Kit:
Mounts a Model 2016 and a 5.25-inch
instrument (Models 195A, 196, 220, 224, 230, 263, 595, 614, 617, 705, 740, 775, etc.)
side-by-side in a standard 19-inch rack.
Carrying case
Model 1050 Padded Carrying Case:
A carrying case for a Model 2016. Includes handles and
shoulder strap.
General Information 1-5
To Next Page
Loading...
