10 Keysight 16860 Series Portable Logic Analyzer Service Guide
Contents
Create Test Configuration Files 36
Create Configuration File 1 - Multiple Clocks (no Marker) 36
Create Configuration File 2 - Multiple Clocks (with Marker) 39
Create Configuration File 3 - Single Clock (no Marker) 42
Create Configuration File 4 - Single Clock with Marker 43
Determine Maximum Data Rate for Multiple Clocks Mode 45
Pod 1 Clock - Maximum Clock Rate 45
Pod 1 Clock - Setup for Maximum Data Rate 46
Pod 1 Clock - Measuring Maximum Data Rate 50
Pod 2 Clock - Maximum Clock Rate 51
Pod 2 Clock - Setup for Maximum Data Rate 53
Pod 2 Clock - Measuring Maximum Data Rate 54
Pod 3 Clock - Maximum Clock Rate 55
Pod 3 Clock - Setup for Maximum Data Rate 56
Pod 3 Clock - Measuring Maximum Data Rate 57
Pod 4 Clock - Maximum Clock Rate 59
Pod 4 Clock - Setup for Maximum Data Rate 60
Pod 4 Clock - Measuring Maximum Data Rate 61
Determine Maximum Data Rate for Single Clock Mode 63
Single Clock Rising Edge - Maximum Clock Rate 63
Single Clock Rising Edge - Pod 1 Data - Setup for Maximum Data Rate 65
Single Clock Rising Edge - Pod 1 Data - Measuring Maximum Data Rate 66
Single Clock Falling Edge - Maximum Clock Rate 67
Single Clock Falling Edge - Pod 1 Data - Setup for Maximum Data Rate 68
Single Clock Falling Edge - Pod 1 Data - Measuring Maximum Data Rate 69
Single Clock Both Edges - Maximum Clock Rate 70
Single Clock Both Edges - Pod 1 Data - Setup for Maximum Data Rate 72
Single Clock Both Edges - Pod 1 Data - Measuring Maximum Data Rate 72
Single Clock Both Edges - Pod 2 Data - Setup for Maximum Data Rate 73
Single Clock Both Edges - Pod 2 Data - Measuring Maximum Data Rate 74
Single Clock Both Edges - Pods 3 to 8 75
Conclude the State Data Rate Tests 76
Performance Test Record 77
4Calibrating
Calibration Strategy 80
5 Troubleshooting
To use the system troubleshooting flowcharts 82
To use the logic acquisition troubleshooting flowcharts 87
To Next Page
Loading...
Need help?
General
