Keysight 16860 Series Portable Logic Analyzer Service Guide 15
General Information 1
Specifications
The specifications are the performance standards against which the product is tested.
Table 1 Maximum State Data Rate Specification for the 16860 Series Logic Analyzers
1.Specification (spec): Represents warranted performance of a calibrated instrument that has been
stored for a minimum of 2 hours within the operating temperature range of 5 to 40 °C, unless otherwise
stated, and after a 45-minute warm-up period. The specifications include measurement uncertainty.
350 MHz
(Base configuration)
700 MHz
(Option 700)
350 MHz
(Base configuration)
Single Clock Single Clock Multiple Clocks
Maximum state data rate
(spec)
1
• Captures data up to
350 Mbps on either
edge of a clock up to
350 MHz
• Captures data up to
700 Mbps on either
edge of the clock up
to 700 MHz
• Captures data up to
700 Mbps on both
edges of a clock up to
350 MHz
• Captures data up to
1400 Mbps on both
edges of the clock up
to 700 MHz
• Captures data up to
700 Mbps on any
combination of
multiple clocks up to
350 MHz
To Next Page
Loading...
Need help?
General
