Keysight 16860 Series Portable Logic Analyzer
Service Guide
6 Removing, Replacing, or Re-
turning 16860 Series Logic
Analyzer Assemblies
Before you Start / 106
Repair Tools Needed / 106
Back Up Data and License Files / 107
Prepare the Logic Analyzer for Disassembly / 107
Removing and Replacing the Hard Drive, Acquisition Bezel, and Cover / 109
Removing and Replacing the Front Panel / 112
Disassembling the Front Panel / 114
Removing and Replacing the Fan Deck / 118
Removing and Replacing the Acquisition Tray / 119
Removing and Replacing the Duct / 121
Removing and Replacing the Motherboard / 122
Removing and Replacing the FIB Board / 124
Removing and Replacing the Power Supply Shroud and Power Supply / 126
Returning the 16860 Series Logic Analyzer or its Assemblies / 129
If the 16860 series logic analyzer’s assemblies/parts are found faulty and need to be
repaired/replaced, refer to the procedures included in this chapter that guide you how to repair,
replace, or return these to Keysight Technologies.
Service instructions included in this chapter are for trained service
personnel. Do not perform any service or attempt to remove/replace an
assembly unless qualified to do so.
To Next Page
Loading...
Need help?
General
