STATus:UNR:CONDition? (@<chanlist>)
Queries the condition register for the UNR Status group. This is a read-only register, which holds the
live (unlatched) Unregulated status. Reading the UNR Status Condition register does not clear it.
Parameter Typical Return
<chanlist> one or more channels <bit value>
Read the UNR status condition register: STAT:UNR:COND? (@1
l
The value returned is the binary-weighted sum of all enabled bits in the register. For example, with
bit 2 (value 4) and bit 4 (value 16) set, the query returns +20.
l
The condition register bits reflect the current condition. If a condition goes away, the cor-
responding bit is cleared.
l
*RST clears this register, other than those bits where the condition still exists after *RST.
5 SCPI Programming Reference
138 Keysight MP4300 Series Operating and Service Guide
To Next Page
Loading...
