Keysight MP4300 Series - Page 26

STATus
:EDP
:CONDition? (@<chanlist>) Queries the EDP condition register.
:FRAMe
[:EVENt]? Queries the operation event register.
:CONDition? Queries the operation condition register.
:ENABle <value> Sets the operation enable register.
:NTRansiton <value> Sets the Negative transition filter.
:PTRansiton <value> Sets the Positive transition filter.
:OPERation
[:EVENt]? (@<chanlist>) Queries the operation event register.
:CONDition? (@<chanlist>) Queries the operation condition register.
:ENABle <value>, (@<chanlist>) Sets the operation enable register.
:NTRansiton <value>, (@<chanlist>) Sets the Negative transition filter.
:PTRansiton <value>, (@<chanlist>) Sets the Positive transition filter.
:PRESet Presets all Enable, PTR, and NTR registers.
:QUESt<1|2>
[:EVENt]? (@<chanlist>) Queries the questionable event register.
:CONDition? (@<chanlist>) Queries the questionable condition register.
:ENABle <value>, (@<chanlist>) Sets the questionable enable register.
:NTRansiton <value>, (@<chanlist>) Sets the Negative transition filter.
:PTRansiton <value>, (@<chanlist>) Sets the Positive transition filter.
:UNR
:CONDition? (@<chanlist>) Queries the UNR condition register.
1 Quick Reference
26 Keysight MP4300 Series Operating and Service Guide