Kidde Fire Systems ARIES NETLink

Configuration and Programming
February 2012 3-42 P/N 06-237058-001
Figure 3-34. ARIES NETLink Set Menu Functions (Fig. 16 of 18)
3. SET
*
6. OUTPUTS/BACKPLANE->2:BACKPLANE CONFIG->5: DACT
BACKPLANE CONFIGURATION
PRESS '0' TO EDIT THE PARAMETER
PRESS ENTER TO SELECT THE VALUE
PRESS <- TO EXIT THE CONFIG
DACT
OWNER LOCATION:
*__________________________________
PRESS ‘0’ TO CHANGE SETTING
PRESS ENTER TO VIEW NEXT SETTING
DACT
USE SCROLL FOR OPTIONS, ENTER TO SELECT
END OF CONFIGURATION, SAVE?
YES
After final parameter , the following appears
DACT
CURRENT VALUE
OWNER LOCATION:
DACT Module owner location
1. DACT CONFIG
2.PURGE SESSION
3.PURGE TEST
4.PURGE ALL
Cont’d