Kidde FX-64 - Loop Configuration Options

Chapter 2: Front panel programming
P/N 3102352-EN • REV 005 • ISS 28DEC18 79
• Key #1
• Key #2
• Standalone Op
Advanced programming for panel and loop options is covered in the following topics in this
chapter.
Programming events
Advanced programming lets you create custom responses to these types of events:
• Panel events
• Loop events
• Panel event corrs (correlations)
Advanced programming for panel and loop events is covered in the last two topics in this
chapter.
Changing loop configuration options
Loop configuration options
Loop configuration includes the following programmable options:
Table 27: Loop configuration options
Option
Description
Loop class
Indicates whether the loop is wired Class A or Class B.
Zone
Select this option to add a zone.
Correlation
Groups Select this option to add correlation groups.
Device
Select this option to add devices.
Loop 2 Enable [1]
Select Yes to enable Loop 2. Select No to disable Loop 2. [1]
Loop 2 Fst Grp [1] [2]
Select:
001 to 025 to combine loop 1 and 2 devices in the same fast groups
— or —
101 to 125 to use separate fast groups for loop 2 devices.
Loop 3 Enable [1]
Select Yes to enable loop 3. Select No to disable loop 3. [1]
Loop 3 Fst Grp [1] [2]
Select:
001 to 025 to combine loops 1 and 3 devices in the same fast groups
— or —
126 to 150 to use separate fast groups for loop 3 devices.
Loop 4 Enable [1]
Select Yes to enable loop 4. Select No to disable loop 4. [1]